Installation only

ABB Terra AC installation

Have an ABB Terra AC wallbox? We install it: from 24.000 RSD, final price, next to the distribution board. The Terra AC comes in versions from 3.7 to 22 kW and has built-in DC fault-current detection, and ABB’s manual says a type A RCD ahead of it is sufficient.

Updated: November 17, 2026
An electrician measuring current with a clamp meter in a distribution board

Versions and power

Code
Power
Connection
TAC-W4
3.7 kW
one phase, 16 A
TAC-W7
7.4 kW
one phase, 32 A
TAC-W11
11 kW
three phases, 16 A
TAC-W22
22 kW
three phases, 32 A

The letters in the code say what the unit has: T is a socket, S a socket with a shutter, G5 a 5 m cable, R an RFID reader, C a 4G modem, D a display, M a MID meter.

The unit is commissioned with the TerraConfig app and used with the ChargerSync app; it connects over Wi-Fi, Bluetooth or Ethernet. It supports OCPP 1.6.

Protection: what the manufacturer asks for

ABB’s installation manual names a type A RCD, 30 mA at most, because the unit itself detects DC fault current above 6 mA. For the breaker the 2022 manual asks for at least 16 A for a 16 A unit and at least 32 A for a 32 A unit, leaving the choice to the electrician; an older edition gives 20 A and 40 A.

Basic installation includes an RCD (FID) and a circuit breaker.

Cable cross-section

The terminals take conductors with a cross-section of 2.5 to 10 mm²; ABB gives a minimum of 2.5 mm² for 16 A and 6 mm² for 32 A.

Basic installation includes up to 2 m of cable next to the distribution board. We choose the cross-section by the current and the length of the route, and a longer route is priced after the assessment.

What to check before buying

  • Check the full model code: it decides whether the unit has a cable or a socket, RFID, 4G and a MID meter.
  • Only models with the letter M in the code have a MID meter, and those are the models with a display.
  • A static power limit is set in the app; dynamic management needs an external meter with a Modbus link.

Warranty

ABB’s own materials state a warranty of 24 months. A Serbian seller’s listing we looked at (November 16, 2026) gives a term of 2 years.

The warranty on the charger comes from the manufacturer or the seller you bought it from, so keep the receipt.

What the installation price includes

Installation only starts at 24.000 RSD, final price: installation next to the distribution board, up to 2 m of cable, an RCD (FID) and a circuit breaker. The charger must carry the CE mark and have DC fault-current protection (6 mA); if it lacks that protection, we add a type B RCD to the quote. Anything beyond that is priced after the assessment, before any work starts.

  • Send us a message with photos of the distribution board and the spot for the charger — a rough estimate from photos is free.
  • The on-site assessment: 72 h in Belgrade, Novi Sad and Vojvodina; elsewhere we agree the date by message. It costs 2.990 RSD and is fully credited toward the installation.
  • At the assessment we check the wiring, the connection capacity and the cable route, and you get an exact quote before you sign anything.
  • A licensed electrician does the installation in one working day.

If you haven’t bought a charger yet, you can reserve one in the Evolako shop: ABB Terra AC 11 kW.

FAQ

Does an ABB Terra AC need a type B RCD?

Not according to the manufacturer’s manual: ABB says a type A RCD, 30 mA at most, is sufficient, because the unit has built-in detection of DC fault current above 6 mA.

What cable cross-section does an ABB Terra AC need?

ABB gives a minimum of 2.5 mm² for a 16 A unit and 6 mm² for a 32 A unit; the terminals take up to 10 mm². We also choose the cross-section by the length of the route.

Does an ABB Terra AC have a MID meter?

Only models with the letter M in the code. The other models don’t have one, so if you need billing by a MID meter, check that before you buy.

How much does it cost to install an ABB Terra AC?

From 24.000 RSD, final price, for installation next to the distribution board: up to 2 m of cable, an RCD (FID) and a circuit breaker. Anything beyond that is priced after the assessment.

Sources

This page was written with the help of AI tools based on the sources listed, and the data were checked on November 16, 2026. If you spot an error or have newer data, let us know at hello@evolako.com — we publish corrections with a date.

Installing the charger you already have

Send photos of the distribution board, the spot for the charger and the label with the charger’s model code — a rough estimate from photos is free, and we reply within 48 hours.

Send a request