Tesla Wall Connector installation
Have a Tesla Wall Connector? We install it: from 24.000 RSD, final price, next to the distribution board. The third-generation Wall Connector runs on one phase or on three, and the installer sets the current from 6 to 32 A, so we fit it to the capacity of your connection.

Versions and power
It is one and the same unit: the power is set by the connection and the configured current. A Tesla takes 11 kW at most on three phases, so 22 kW only makes sense for another car that accepts that much.
The cable is fixed, Type 2, 7.3 m long, and the enclosure is rated IP55. The unit is configured over its own Wi-Fi network during commissioning; afterward the owner sees it in the Tesla app.
Protection: what the manufacturer asks for
The Wall Connector has built-in residual-current protection: Tesla’s manual describes it as type A with 6 mA DC detection. The manual asks for a dedicated circuit and breaker for each unit and recommends a 20 A breaker for 16 A of output and a 40 A breaker for 32 A.
The manual doesn’t prescribe an RCD ahead of the unit and refers to local regulations. Basic installation includes an RCD (FID) and a circuit breaker.
Cable cross-section
Tesla’s manual says the Wall Connector should not be connected with stranded cable thinner than 4 mm², whatever the breaker; the terminals take up to 25 mm².
Basic installation includes up to 2 m of cable next to the distribution board. We choose the cross-section by the current and the length of the route, and a longer route is priced after the assessment.
What to check before buying
- Check that it is the European version, with a Type 2 cable (the part number starts with 1529455).
- Tesla’s online shop sells the Wall Connector to owners signed in to a Tesla account; we found no shop for Serbia (November 16, 2026). If you buy it in another country or used, ask for the receipt, which you need for the warranty.
- Sharing power between several units (up to 6) needs only the units themselves, while dynamic management needs an additional meter with an RS-485 link, sold separately.
- Tesla’s manual doesn’t mention a MID meter. If you need billing by a MID meter, see the packages with a MID meter.
Warranty
Tesla’s European manual states a warranty of 48 months for personal use at a single-family home and 12 months for commercial use, from the invoice date. Tesla counts charging at apartment buildings, hotels, offices and parking lots as commercial use.
The warranty on the charger comes from the manufacturer or the seller you bought it from, so keep the receipt.
What the installation price includes
Installation only starts at 24.000 RSD, final price: installation next to the distribution board, up to 2 m of cable, an RCD (FID) and a circuit breaker. The charger must carry the CE mark and have DC fault-current protection (6 mA); if it lacks that protection, we add a type B RCD to the quote. Anything beyond that is priced after the assessment, before any work starts.
- Send us a message with photos of the distribution board and the spot for the charger — a rough estimate from photos is free.
- The on-site assessment: 72 h in Belgrade, Novi Sad and Vojvodina; elsewhere we agree the date by message. It costs 2.990 RSD and is fully credited toward the installation.
- At the assessment we check the wiring, the connection capacity and the cable route, and you get an exact quote before you sign anything.
- A licensed electrician does the installation in one working day.
If you haven’t bought a charger yet, you can reserve one in the Evolako shop: Tesla Wall Connector.
FAQ
Does a Tesla Wall Connector charge other cars too?
Yes. The European version has a Type 2 cable, and Tesla’s support page says electric cars of other brands can charge with it too.
Which breaker does a Wall Connector need at 11 kW?
According to the table in Tesla’s manual, 16 A of output (11 kW on three phases) needs a 20 A breaker. With a 16 A breaker the unit is set to 13 A, which is about 9 kW.
Does a Wall Connector need a three-phase connection?
No. It also runs on one phase, up to 32 A, which is 7.4 kW; on a three-phase connection at 16 A per phase it delivers 11 kW.
How much does it cost to install a Tesla Wall Connector?
From 24.000 RSD, final price, for installation next to the distribution board: up to 2 m of cable, an RCD (FID) and a circuit breaker. Anything beyond that is priced after the assessment.
Sources
- Tesla — Gen 3 Wall Connector installation manual for Europe (Type 2, three-phase)
- Tesla — Wall Connector (support page)
- Tesla — Onboard Charger (support page)
- Tesla Shop (Ireland) — Wall Connector, as of November 16, 2026
This page was written with the help of AI tools based on the sources listed, and the data were checked on November 16, 2026. If you spot an error or have newer data, let us know at hello@evolako.com — we publish corrections with a date.
Installing the charger you already have
Send photos of the distribution board, the spot for the charger and the label with the charger’s model code — a rough estimate from photos is free, and we reply within 48 hours.
Home charging for apartment residents — installation, MID meter and billing down to the dinar.
The iPhone and Android app is coming soon.
Let me know when it’s out →
ANDREI SMEKHOV PR NOVI SAD · Katolička porta 6/3, 21000 Novi Sad · Reg. no. 68853834 · Tax ID 116047038 · Accessibility

